I had a conversation with a pilot on the alcohol auto fuel
problem in composite airplanes. He tells me you cannot
get gasoline in Texas without alcohol in the fuel.
Is that true?
Back when I was living up in Northern Ontario our fuel
lines used to freeze because of a small amount of water
in the fuel. We carried Alcohol to dump a small quantity
in the tank and it would immediately find the frozen water
and melt it so to speak. By the time you could get back in
the car the engine would start again.
Water goes to the bottom of the tank. What would happen
if you put water in car gas with alcohol in it and then drained
the water from the bottom of the tank? Would the alcohol come
out as well?
What affect does alcohol have on rubber bladder fuel
tanks?
Paul Lamar
Hi Paul
I usually only read ( Thanks) to learn, but I do have some info on this
I have eagle fuel cell bladders, and they are guaranteed to be alcohol
proof. so much so they are rated to be used with pure alcohol fuel for
their entire 50 year warranty period.
I think you are talking about your 182. Who made you bladders ?
and of course Cessna does not allow alcohol in any amount to be used in
their systems.
Do you also have a Peterson STC ?
I so, it comes with a great pamphlet on their finding of alcohol
in Cessna fuel systems ( including O- ring damage etc. )
I believe the alcohol problem may be true in Texas auto fuels. MBTE is
pretty much illegal everywhere, so ethanol is the only other viable option.
check who made your bladders.
Lionel
I don't know who made the bladders. I was mostly interested in
bladders for composite air planes. One could cut a large oval
hole and insert them into the fuel tanks.
No Peterson STC.
I can't use auto fuel anyway as the compression ratio is 9.5 to one.
100 LL only. On top of that I am selling it.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.