I lost compression in my rear chamber. I had been producing sweeeeeeeet
power, but was having some serious hot start issues. Some of y'all may
have read my post on this on the FlyRotary list.
So, I pulled the rear iron tonight to check the apex seals. Luckily,
the apex seals themselves look good. Also, the combustion chamber looks
as I think it should. However, I did find some issues.
The one I was expecting was that the apex springs were flat. Also, one
of the apex corner seal plugs was broken as was a small piece off of one
of the side seals. No damage was apparent inside the chamber so I think
they broke as I was taking them out. Donno, but there is not apparent
damage inside at all.
Also, the springs for the corner seals were flat.
The really strange thing to me is that the rubber apex corner seal
plugs, the little rubber inserts that seems to hold the assemble
together were gone....none of the six were anywhere to be found. This
engine has not been overheated to any abusive degree, but the inserts
were gone.
I am still waiting for the Mazda apex seal springs to arrive from
Mazdatrix. I will now need to order the rubber inserts as well and the
corner springs and wait for them to arrive.
Thoughts?
I on an RX7 forum that some of the early RA springs are now known to be
weak links.
I am attaching some photos. Note, the springs are laying on their sides.
All the best,
Chris Barber
Houston
I keep telling people, when it comes to apex seals, do not
buy after market stuff. This stuff is harder to make correctly
than it looks. The seals themselves are made from a special
iron alloy. NOT steel.
http://www.rotaryeng.net/history.html
Apex seals catch heck. Especially from peripheral
exhaust ports. When the port first opens you have
2000 F gas squirting out a small slot at supersonic
velocities over an apex seal. The center of the seal
can run 500 F. That is why the apex seal lube oil's
main job is to cool the seals. The best way to do that
is mix the 2 cycle oil with the fuel. Jim Mederer said
up to 4 oz per gallon does not affect the ignition.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.