Subject: prop efficiency at 6K
From: Rotary Engine
Date: 1/16/2011, 11:26 PM
To: AAA Put this in the To box


 Can anyone tell me the biggest disadvantages of
 running a 28 inch multibladed [3, 4, or 5 blades]
 constant speed or in-flight adjustable prop at 6K?

 My calculations yield that prop tip speed of 950 fps,
 forward velocity of 350 knots at 6000 rpm gives a
 prop diameter of 28.41 inches.

 prop dia [feet] = sqrt( [(V tip of 950 fps)^2 minus (forward speed of
 350 knots=591fps)^2]/[(100rev/s)^2(pi)^2] )

 I understand why moving larger numbers of air molecules a little
 slower is more efficient that moving fewer numbers of air molecules
 a little
 faster, but say I really want to avoid a large prop disc, and have
 enough power
 to be a little inefficient.  I won't be using ducts, however.  Any
 takers?

 Gene Kahn

 Well I can't really say why other than the factor you just stated.
 However the worlds fastest prop airplanes have huge props running at
 low
 RPMs. P51, Corsairs, Bearcat, etc., etc.. The latest example is the
 Osprey V22.

 I would say another huge drawback will be the noise. The un ducted
 fan was abandoned for the reason.

 I would say the largest drawback would be take off performance or
 the lack thereof.

 Paul Lamar

 A larger portion of the prop span will be affected by tip and hub
 losses than one with longer blades.

 The hub will have to be more complex and consequently heavier than
 one with fewer blades.

 The airflow around the engine compartment will be more critical
 because the short blades won't tolerate very much turbulence at the
 root without an intolerable loss of efficiency.


 Matt-


Thank you Paul and Matt...

GK

Quite the slippery little ship you have in mind - vmaxprobe + NA
rotary?  turbo?
At 950fps prop tip efficiency has already started to fall off.
The prop efficiency loss at 350knots will be low.  A correctly pitched
prop will be more critical.
You should have enough HP/thrust to get off the ground even with the 28"
prop.
Probably easier to go with a 40# 2.17/2.85 redrive and a 3.5-5' prop.
Cheers
Cary

Paul Lamar


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.