Subject: Improved Renesis Water Pump
From: Rotary Engine
Date: 1/17/2011, 7:16 PM
To: AAA Put this in the To box




Paul,

With an eye toward improving the cooling on my p-port 20B, I ordered one
of these custom water pumps from Mazmart yesterday.  They claim it will
not cavitate up to 10,000 rpm.  So, it should be well within the
operating limits at 6000 - 7000 rpm.  This looks even nicer than the 20B
impeller.

Mark

P.S.  They will give a discount for group buys of 10 or more.


------------------------------------------------------------
Great news Mark. I assume this is the RX8 version. Do they have
a 13B version. http://www.mazmart.com/

Do you have the exact link? Is it a new RX8 part or a used
RX8 part. I can't find it on the site?

When the continuous power goes up the heating requirements
on the rotor housings also go up. It is a good idea to install
a rotor housing thermocouple. Similar to a cylinder head
temperature gage. You want to keep the temperature of the aluminum
under 500 F.

The old 13B water pump had a better rotor than the
new RX8 water pump.

Is your engine back together? Let us know
what the rotor housing thermocouple says.

Paul Lamar

P.S.

I forgot to mention Mark is running an RX8 water pump on a
3 rotor p-port so the cooling requirements are 150%
of that of an RX8.

Paul Lamar



Hi Paul,

I have had a reply from Mazmart about the improved water pump.
The price will be $240 for orders of 4 or more.
What I need is 3 other interested guys to come forward
So we can get an order together.

Chris in NZ

That is a ridiculous price for a 3 inch diameter impeller.
I think you could walk into any NC mill shop in NZ and have just one
made for that price.

Software has improved to the point that all you have
to do is a drawing and software writes the NC mill program.

Actually all you have to do is buy a good replacement RX7 pump cartridge
for $30, press the impeller off. Throw away the rest of the RX7 pump
cart cartridge and install the RX7 impeller on the RX8 pump.

If you are using an RX8 pump on a 13B don't! Use a GMB aluminumn
cartridge pump instead.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.