Subject: This NL is about rotary engines.
From: Rotary Engine
Date: 1/17/2011, 4:00 PM
To: AAA Put this in the To box


 Silly me, I had thought this site was all about rotaries and INTERNAL
 COMBUSTION ENGINES at that. OK talk about 6 stroke engines if you must,
 but if you're going to talk about COMBUSTION ENGINES don't forget to
 talk about the boiler. A bit less waffle and more precision would be
 appreciated. I'm surprised Paul hasn't jumped on some of this stuff:(

 John Evans

 Sorry John. I'll try harder. OK people stick to the rotary.
 No more silly piston engines.

 If the whole world was using rotary engines.

 "My father likes
 to say: If the whole world was using rotary engines and somebody
 would come
 along and say "Hey, I've got a great idea. I'll make a piston engine. It
 will have a piston moving up and down to drive a crankshaft. And then
 I'll
 make valves and camshafts, and the engine will ignite every two
 rotations.."
 People would shake their head and walk away. IMHO the piston engine
 is only
 still alive, because the technology has had more time to develop."

 Poul Henrik Woelfle

 Paul Lamar

 How about narrowing it down further to rotaries for aviation
 use ? ?
 Ben.

 Fair go Ben, if you strictly confine it to aviation you'll rule out my
 single rotor driving my Colorado Junior jet unit. I want to build this
 one as a trial run before I aviate on a rotary, using any bits I can
 scrounge. It sounds like I can leave out the side seals and put up with
 a bit of smoke, as I'll be using 2 stroke oil in the sump it shouldn't
 coke things up like other oils. We've already proven its film strength
 is as good as or better than most conventional engine oils.

 Paul, you said I'd need a big lathe to turn up a single rotor E shaft
 from a 13B. Why? I thought my little old 3 1/2" Myford would be able to
 handle it?

 John Evans

 Rigidity. No replacement for a lot of cast iron.

 Paul Lamar

Point made! The Myford does OK as long as I keep the cuts small. Dad's
home made lathe suffered from a lack of rigidity.

John Evans

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.