How may people have wired an EC2?
How many people need to wire an EC2?
How many people have wired it more than once?
Paul Lamar
I have an EC3 that I wired to a 20B on a test stand.
I haven't been able to get the engine started.
The EC3 is currently in Tracy's hands while he inspects if for possible
damage, possibly from inadequate or faulty ground.
Jay
I notice there are two connectors instead of one. I assume
the small one goes to the coils and injectors.
Is that right? Can you scan the wiring diagram and upload
it to me?
Paul Lamar
I don't have a scanner Paul. It's a little dated but the PDF manual from
Tracy's web site might be of use.
http://www.rotaryaviation.com/pdf%20files/EC2AinstallRev2.pdf
Jay
That is the EC2. I have that one.
Paul Lamar
Paul,
Here are 3 schematics from the EC3 Setup and Installation Guide. They are sent
as three separate zipped pdf files.
William
Thank you very very much William. That is a huge improvement.
The same number of wires are used in the EC to PCM connection so I will
order some color coded cable for that harness and sell it by the
foot.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.