Subject: torsional vibration
From: Rotary Engine
Date: 1/21/2011, 10:47 PM
To: AAA Put this in the To box


Nice to have some English data.
Highest RPM rating I have seen so far.

I don't know what they mean when the say mass moment of inertia.
Is that of the coupling or the mass moment of inertia it will
drive? Anybody know how to convert Kg per meter squared?
The magnitude of that could tell us if it was just the coupling.

Paul Lamar


Back cover of Vector Mechanics for Engineers - Dynamics (Ferdinand Beer
et. al.)

For mass moment of inertia:
1 lb.*ft*s^2 = 1.356 kg*m^2

Chris Cosman
...back to homework...

Thanks Chris. Are you sure? What is "s" ?
Seconds?

Is that the same as this?

Paul Lamar

Mass Moment of Inertia from the book's appendix:
Notice the picture of the 'camshaft'... don't let that shake your confidence in the math though.

Chris Cosman

I hate to tell you this Chris but did you know you can solve
any integral calculus problem in Quick BASIC ?

What you do is sum up all the little tiny cubes of mass AKA "dm"
multiplied by their distance squared from the axis of interest :)
Of courses you need a good 3D drawing of the lump with dimensions :)

What this does in 5 minutes gives you all you need to know
about integral calculus :)

I have never tried it but I think a spread sheet can do the same
thing.

I had a mental block against integral calculus until this dawned on me.

Paul Lamar

No need to apologize.  It seems to me that if we want to boost our competitive edge in this country, we should start teaching students how real engineers solve problems and less time on gnarly mathematical concepts.  I could be wrong...

The approach you refer to is generally referred to as Numerical Methods, currently on my course schedule this semester.  I'm using Matlab software, short for Matrix Laboratory.  Handles large data sets well.  I'll spend the next 4 months boiling complex calculus and differential equations problems into simple mathematical approaches the computer can iterate to death.  Should be fun, except for the deadlines.

You are right about the spreadsheet approach.  We used to design folded horn loudspeakers and devised a spreadsheet to iterate the location of each fold and from there, the location of the baffles.  We ended up fitting a 15" woofer on a 9 foot horn in less than 20 cubic feet.  Works well for movies like "Open Range".

Now I'm off topic - sorry.

Chris Cosman

No worries mate. I agree with you on the arcane math.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.