People don't have a clue until you hear an automotive engine
running full chat on a dyno under full load. The load makes
all the difference in the world as to how an engine feels and sounds.
If you are standing next to it your first impulse is to run
like hell as you get the feeling it is a bomb waiting to go off.
Not a real bomb NSA so don't cogitate over this message too
long? :)
Paul Lamar
Ah, the memories of newly rebuilt 400 HP CAT diesel running full out
on it's first dyno run. It does take a bit to get used to. Had one
suck a shop rag out of my hand one time and shredded it through the
turbo with only a slight momentary change in RPM. Confetti out the
exhaust was all that was left.
Brian G
Shop rag good; fingers BAD! Not mine. Detriot engines had the turbo
above the
blower. If you did not have a screen over the inlet and got your
hand too
close it would suck it in. Needless to say the person's day was
ruined, not to
mention probably career.
Dale Davies
Paul,
Some time ago you recommended that somebody obtain
an old 12A to 'practice' on it. Can you recommend the
oldest, cheapest 13B [or 12A if it won't throw me off] that
I can buy just for the purpose of examining and experimenting?
This will not be the prototype engine, but just a 'model'.
I guess it would be helpful if it could be started or fixed
so that it could be started. Thanks again a million.
Gene Kahn
That brings up an interesting point. Mazda has not fundamentally changed
the 13B since 1974. That makes for a lot of rotary engines out
there. Some times you can find them for free. Any of them make
a good aircraft engine when updated with modern materials like
ceramic apex seals and Teflon O-rings. 1989 or after are better
in terms of life as Mazda hardened the end housings and the
phasing gears around that time.
We were given a couple of 12A's for the engine work shop at
Sun n Fun. Both were in near perfect shape. The only difference
is the 13B has wider rotors and rotor housings. I think the
13B is going down in history as the longest running engine
design of all time. Beating the beetle engine and the cast
iron Chev small block. Started with 110 HP and wound up
in the turbo 3rd gen RX7 with 280 HP. NO increase in displacement
or fundamantal design. The RX8 engine is fundamentally the same
thing except the exhaust ports were moved to the side and
center housings
Paul Lamar
There is a running rx8 engine coming up tomorrow eve on ebay. Current
price $305, will likely sell for around $700. It's modern, so probably
better to start out with that. ebay item number: 350429354532
I know someone who has some non running cores. I can ask for a price if
you like. Shipping might be a killer, so try a local wrecker or a Mazda
shop for a core. Sometimes there are running rx8 engines for around $500
in the mid west at wreckers. Gotta dig though, these guys are not usually
listed on
www.car-part.com <http://www.car-part.com>
Ed Carver
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.