Subject: 2 stroke oil in the oil pan
From: Rotary Engine
Date: 1/27/2011, 5:31 AM
To: AAA Put this in the To box

 Don't forget the temperature factor. You could heat your
steel test wheels to 500 F.

I don't recommend 2 stroke oil in gear boxes. Use high pressure
gear oil. It is designed for that purpose. Tracy is getting away with
high temperature crankcase oil in his gear boxes which is a testimony
for the durability of the  Ford planetary set that is used in auto
transmission. Auto TX's normally use ATF which I suspect is needed
for the friction and clutch packs found in auto tx's.

I also don't recommend it's use in the oil pan as two stroke engines
do not have plain journal bearings.  2 strokes use roller and ball
bearings. Oils are designed for specific purposes. Trust the oil
engineers. They know what they are doing.

Paul Lamar


I concur with Paul, trust the engineers. Bean counters is another kettle of
fish. Automatic oil is I believe a synthetic these days. The different specks
are for different clutch materials. An old trick was to put 1 qt of Type F in
the Hydramatics to get the clutches to grab a bit quicker. Kind of like a
shift kit. It had a different friction coeficient than the Dexron. I would be
inclined to use the appropriate Ford type oil in the PSRU. Due to the duty
cycle being high in AC use compared to automotive, a fairly large cooler would
be mandated along with a temp gauge. 250* F is MAX with 200* being optimum.

Put the too smoke oil in the gas where it belongs and synthetic in the sump.

Dale Davies


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.