Subject: sparking to the rotor
From: Rotary Engine
Date: 1/27/2011, 5:35 AM
To: AAA Put this in the To box


With regards to sparking to the rotor; this is not good. The current then
needs to find a path to continue to ground. It may try through the seals or
through the bearings. That has the potential to cause all sorts of nasty
things to go wrong in the engine. Metal erosion or welding which would be like
galling from lack of lube.

Dale Davies
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.