Paul,
I have been monitoring this newsletter since 12/12/10 so I don't know if
this subject has been discussed.
I have a Rotorway helicopter and believe a rotary engine would be a
perfect fit for an engine exchange. I have moved from MN to CO.
Elevation change from 900 ASL to 6650 ASL. My engine was rated at 128hp
at sea level and who knows what it is at 6600 ft.
My question is would the 13b operate in the vertical position, as it
would be a relatively easy conversion. I have gotten some indication
that with some modifications to the oil system and possibly a thrust
bearing to support the eccentric,it would be possible.
I don't want to get too excited about this concept until I believe it
would be possible.
Please weigh in and anybody else who might know.
Rotorway ships have a large radiator and an oil cooler
Thanks
Rick B
That subject has come up several times. I think the consensus
is no but nobody has tried it to my knowledge.
Power would not be a problem.
As I recall there is a mini sprint car rear axle that might
work if you wanted to run horizontal.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.