Subject: Vertical operation in helicopter
From: Rotary Engine
Date: 1/30/2011, 2:51 PM
To: AAA Put this in the To box


Paul,
I have been monitoring this newsletter since 12/12/10 so I don't know if
this subject has been discussed.
I have a Rotorway helicopter and believe a rotary engine would be a
perfect fit for an engine exchange. I have moved from MN to CO.
Elevation change from 900 ASL to 6650 ASL. My engine was rated at 128hp
at sea level and who knows what it is at 6600 ft.
My question is would the 13b operate in the vertical position, as it
would be a relatively easy conversion. I have gotten some indication
that with some modifications to the oil system and possibly a thrust
bearing to support the eccentric,it would be possible.
I don't want to get too excited about this concept until I believe it
would be possible.
Please weigh in and anybody else who might know.
Rotorway ships have a large radiator and an oil cooler
Thanks
Rick B

That subject has come up several times. I think the consensus
is no but nobody has tried it to my knowledge.
Power would not be a problem.
As I recall there is a mini sprint car rear axle that might
work if you wanted to run horizontal.

Paul Lamar


I think there is as much potential users for a rotary in the helo
experimental s...light weight rotor would really help with the rotor
resting on the side housing if mounted vertical......

If the rotor lobe could "hold" the rotor from having to lay up against
the housing with a split encapsulated bearing, that would be a major
advancement for the vertical orientation..

I have a couple of designs with that concept....the E-lobe is actually
part of the rotor assembly and the E- shaft is splined to accept the
lobe..This of coarse would mean a special shaft.

A single rotor would be a good place to start, not that tough to do....

Does anyone have any info other than the standard brochure stuff on the
M1 Speed Cruiser.?   Saw it at Oshkosh a couple years ago, thought it
would be a great platform for a rotary..

My current search gettin' nothin'...Same folk building the F1 EVO in
Chek Republic.....seems like good work..........

Sold the Cirrus.  Looking for a replacement large enough for my expanded
physical dimensions..RV7 tooooo small, RV8 is good fit but the wife
doesn't want stare at the back of my head for hours..


jeff

My 4 place KIS Cruiser is/was spacious but I sold it :)

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.