Dave where did you find that rubber elbow
 for the turbo charger out put? Is that a stock
 Mazda part? I need something real low profile
 as the KIS cowl top is much lower than most
 airplanes.

 Paul Lamar


Turbo OUT is aluminum tubing with very short sections of 2 1/2(?) hose.

You mean that big 4" 45degree INLET?

Baker Bearings (HPS silicone)

Dave Lemon

No the one the arrow is pointing to.
2nd gen 1990 1991

This is Dave Leonard's airplane.

Paul Lamar