This has been a lot of work but I am having fun.

I have checked and double checked dimensions of all the
parts and the 3D models are as accurate as I can make them.

I am fairly confident everything will fit under the cowl.
There will be a 3/4 inch high bulge on top of the cowl
to clear the intake runners. The KIS Cruiser has one of the lowest
cowl tops in the biz. No way around it short of oval tubing.

I am happy to report the injectors mount on the back
side of the inter cooler so they are easy to wire and service.

We are building a custom injector rail for RX8 style injectors
so the fuel plumbing will be as simple as possible.

We are in a tight race to get all this made by the end of
the month.

Michael is one lucky fellow :)

This would be very difficult to do without 3D and my
hat is off to Dave Leonard for achieving it.

Paul Lamar



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.