Dave where did you find that rubber elbow for the turbo charger out put? Is
that a stock Mazda part? I need something real low profile as the KIS cowl
top is much lower than most airplanes.

Paul Lamar


Turbo OUT is aluminum tubing with very short sections of 2 1/2(?) hose.

You mean that big 4" 45degree INLET?

Baker Bearings (HPS silicone)

Dave Lemon

No the one the arrow is pointing to.
2nd gen 1990 1991

This is Dave Leonard's airplane.

Paul Lamar


    Same answer --

    Dave Lemon

    Baker is pretty expensive.

    Paul Lamar



Yes Paul, the black rubber bits in my installation are stock.  They happened
to come with the core that I bought and are holding up nicely.

--
David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net


Thanks Dave.

Paul Lamar
--
I just got a 90 degree (cheap-not silicone 2") hose like that for another
engine.....I went here......

http://www.siliconeintakes.com/

Marc Wiese