Dave where did you find that rubber elbow
for the turbo charger out put? Is that a stock
Mazda part? I need something real low profile
as the KIS cowl top is much lower than most
airplanes.

Paul Lamar


Turbo OUT is aluminum tubing with very short sections of 2 1/2(?) hose.

You mean that big 4" 45degree INLET?

Baker Bearings (HPS silicone)

Dave Lemon

No the one the arrow is pointing to.
2nd gen 1990 1991

This is Dave Leonard's airplane.

Paul Lamar


    Same answer --

    Dave Lemon

    Baker is pretty expensive.

    Paul Lamar



Yes Paul, the black rubber bits in my installation are stock.  They
happened to come with the core that I bought and are holding up nicely.