Subject: Mistral Install (Was: Mistral Parts?)
From: Rotary Engine
Date: 2/8/2011, 5:55 PM
To: AAA Put this in the To box


 I didn't know that Mistral actually made any public sales. Very cool. That
 intake filter looks a lot like what I was planning on doing, although not
so
 much hose to airbox.
 Was this all your work, or was Mistral involved in some of the design and
fab?
 C. Smith

 They did sell a few parts for awhile. They never fully built
 a complete rotary engine of their own. There were always a few
 Mazda parts in their engines.

 Paul Lamar

The FWF was my design.  Mistral supplied the complete engine, wiring
harness,
ECUs, and engine monitor.  The panel wiring to support the engine monitor
and
switches was mine as well.  I had to do the radiator and airflow design.
The
radiators seem to be working great, but my airflow design sucks (or, doesn't

suck enough, depending on how you look at it.)  It will need some work.
I've
got too much air inflow and not enough outflow.  I've got good water
temperatures but high oil temperatures.  The oil temps are manageable with
throttle and airspeed, so I am going to fly off the rest of my hours, then
tackle the problem by reducing the intake area and expanding the outflow.
Some
cut and paste on the lower cowl.

Even though not all parts are Mistral's, their custom parts were really
outstanding, though.

Best Regards,

Steve Thomas

Steve,
I would really like to find a Mistral ECU if you know someone who knows
someone. If it came with a wiring diagram or some programming notes, it
would be even better.
Doug Elting



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.