I just discovered a wonderful catalog for bits
and pieces for rotary installation.
It is called Pegasus Auto Racing Supplies
www.PegasusAutoRacing.com <http://www.PegasusAutoRacing.com>

Prices are not the lowest in the world but they have
a lot of useful stuff.

For the helicopter guys they sell all the bits and pieces
that beef up a VW trany. A cheap way to run your rotary
horizontally. It is easy to adapte the VW tranny to the rotary
because it has been done many times over the last 40 years.
Beefed VW trannys have been used for years in relatively high
powered rear engine formula cars.

Dozens of metric to AN plumbing adapters.
Lots of banjo fittings and adapters to AN.

Cheap prices on MSD ignition systems.
These are cheap enough so it is feasible to use one
per plug. In fact I just had an idea. I think I can build
a trigger wheel that will fire a MSD ignition every ten
degrees at 7500 RPM.

This is a must have catalog if you are installing
a rotary.

Paul Lamar



Aw shucks, my secret is out...

Mark