Subject: Mechanical Fuel Pump on a 13b
From: Rotary Engine
Date: 2/15/2011, 6:37 PM
To: AAA Put this in the To box







  Was there ever a provision for a mechanical diaphragm style fuel pump
  on a Mazda rotary?  Suitable for filling a carburetor float bowl?  I
  looked through on line catalogs for early Mazda rotary powered
  vehicles, and only found electric pumps listed.  Is there a place to
  put a fuel pump eccentric on the engine?

  Regards,

  Matt-

  I had one of the earliest cars in 1973 and it had an electric pump.
  It would have to be belt driven.

  Paul Lamar


  Matt,

  Are you running a 13B or RX8, there is provision for a pump
  If you are RX8. You can use the drive for the apex seal oiler
  If you use premix in the tank instead. I am thinking of doing it
  With my RX8, it will require a machined block to suit.

  Chris in NZ.

  That is a great idea Chris.

  This outfit has all sorts of mechanical fuel pumps.
  http://www.kinsler.com/page--Home-Page--13.html
  Download the complete catalog here.
  http://www.kinsler.com/page--HandbookCatalog--2.html


  Paul Lamar

 Chris, this is an excellent idea and with an out board ignition system no
 electrics are required to operate the engine, with a hand primer you
could
 hand prop it and do away with the starter. Mod the engine Paul, I will
 spring for the mod if it is not too expensive.

 Milo

 I will when I get time. I sold the KIS Cruiser and a firewall
 forward turbo engine package for it and I am getting that ready to
 ship. I bought Mike's RV4 so I need money to pay for that
 and space in the hangar to house it. I also need to pick it up
 in Minneapolis and tow it down here.

 The C182 is up for sale as well. All this takes time.

 I have your test stand almost ready to start. I am waiting
 on some more wire of the right size. I think the EFI plumbing
 needs redoing too. Once we get it running with Tracy's system
 as a base line then we can try some other simpler ideas.

 I need a couple of self clones :)

 Paul Lamar

Paul,
No push, I am sure your plate is full. But I want to add using the oil
holes
for direct injection like a standard aircraft engine.

milo


Does anynone know the rpm of the oil pump on the RX8 engine?
milo

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.