Does anybody have one they can sell?
Does anybody know the part number?
Paul Lamar
Yup, that has been a tough one for me. Stock wouldn't fit my front
cover. I ended up making one out of an off-the-shelf plate on the turbo
that fit a 1/2NPT that I connected to some copper tubes that I brazed
into the proper shape...
It has alway been a source of slowly leaking oil.
Sorry I don't have a stock one for you, but if you find a used turbo
core on e-bay, it will sometimes come with the oil return.
--
David Leonard
Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net
Thanks Dave.
---------------------------------------
I think I solved the problem.
Make it :)
Burns has .75 inch OD 16 gage 90 degree bends in 304.
Expensive but not that much. Same OD as the stock drain back.
McMaster has all steel braided hose for the flex part.
NPT ends but they can be cut off and welded.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.