Subject: KIS motor mount and nose gear.
From: Rotary Engine
Date: 2/20/2011, 4:38 PM
To: AAA Put this in the To box


 Michael,
 I woke up with another bright idea this morning.
 I combined the nose gear bracket and the rear motor
 mount strut bracket in one part. The inertia load of
 the engine on the nose gear during a hard landing goes
 directly into the nose gear and not through the firewall
 first. Direct load path through one bracket. Reduces the stress
 on the firewall.

 http://tinyurl.com/45o5fv4
 http://tinyurl.com/4rrpv7v


 Paul Lamar

 Paul,

 That sounds like a wonderful idea.I think with your ideas that will be
 the best KIS cruiser in the whole world keep up the brain ticking you
 might be able to make it fly without fuel.Ha,ha.By the way I got in
 touch with Doug.He seems to be having a hell of a project.Is Dave
 Leonard is one who is selling his prop.?.I am definitely interested if
 it will suit the KIS.

 Michael

 Jim Poole my machinist is working on it as we we speak. Pictures in a
 few days. Here are a couble of 3D's but the strut is not shown.

 BTW is it OK to off set the push pull throttle about 8 inches off center
 towards the pilot or do you anticipated somebody flying from the
right seat?

 Paul Lamart


I do not anticipate anybody to fly from the right.That will only happen
in an emergency situation like something happened to the pilot.However
in that case I do not know how inconvenient that displacement will
be.BTW what will be the other alternatives.

Michael
-- 

I can put it on center line. It makes one or two things a bit less accessible.
Not impossible. Just less accessible.

The other option is a slight S curve in the throttle cable which
adds a bit of friction.

Paul Lamar


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.