Sir, I am interested in the idea, but can you direct me to someone
that has put a rotary in a glastar?
That is the aircraft I am building. Thanks for the website it is very
interesting. Thanks for the newsletter....
Chris
Sigard Ganswindt built a beauty a few years ago unfortunately
it did not cool. I don't know if he still around. I have not heard
from him in years. We have learned a tremendous amount about rotary
installations since this one was built. In fact I wrote about
called How to Cool Your Wankel since this one was built.
The installation techniques, with minor differences, now are the same for
all
airplanes.
Neal Ungar, among others is also building a Glastar. I did the firewall
forward design for him for free. More about that in a few minutes.
Paul Lamar
Paul,
Have just walked in from a trip to Melb to finally pick up my
renisis motor which has been totally rebuilt to racing tolerances by Rohan
Ambrose of extreme Rotaries. . While waiting for the motor I have
manufactured an engine mount to fit Jeff Doddridges front mount, spent
possibly 500 hours in making a mold for new fiberglass cowls to suit the
rotary and a Glastar sportsman. Should anyone want copies of either the
engine mount or the cowls it is now much simpler to do. At this stage the
cowls look like being made from carbon fiber and vacuum bagged.
My immediate concern is to now manufacture temporary adjustable length
inlet runners so that then the engine is ready for the Dyno to see just what
length runner is ideal. Has anyone checked this on a dyno before ???
Theoretically not a big job, but now have staff taking holidays etc, so as
usual it has to fit in around work. I am thinking that it may be two months
before I get to take the beast back for the dyno test. This will be with
Tracy's ECU.
I have photos of the engine mount and the cowl plug if anyone is
interested. It is designed for a horizontal under engine rad. as per Paul's
design which is now being made by PWR in Brisbane for approx $1500 AUD incl
freight. That is for a combined water and oil rad with excess cooling
capacity needed for operations in plus 40 degrees C. Still have to make the
mold for the Rad inlet shroud.
As usual spoke to Rohan re the future of Rotaries. His expertise is in
Racing and has just recently set another world record. Did not ask just
what it was, but has enough trophies to fill a large house. He is not
certain that Mazda will actually produce the 16 x or whatever it is, but he
is proceeding with aluminum end and center plates regardless, and is in the
process of manufacturing his own light weight rotors. For simplicity he is
working around the 13 B motor. He suggests that the ideal motor for
aircraft is a small 4 rotor which does not exist and the numbers are not
there to set up for manufacture, so we look like having to make any future
plans around the standard 13 B. I think he said that he is pulling around
700 HP out of a 13 B (with mods). He has racing cars in his factory that
are absolute rockets.
So as usual a very interesting visit to Rohan. He was very inpressed
with Jeff's machining !!
Neil.
If it is a P-port and it uses 2 inch OD runners with a .065" inch wall thickness
and slide throttle you will get about 250 HP at about 7500 RPM with 19 inch
long tubes.
http://www.rotaryeng.net/intake.html If it is a side port with
butterfly throttle I have no idea as we have not dynoed that configuration.
BTW people, don't be concerned with this much HP. The engine weighs the same
from 150 HP to 250 HP. If you are concerned how it might handle on takeoff
(you should be a little) you don't have to open the throttle all the way.
Send the pictures Neal. There are others on here that might like to buy
a motor mount and cowl.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.