Subject: Final Pictures on KIS Cruiser nose gear & rear MM
From: Rotary Engine
Date: 2/27/2011, 4:01 PM
To: AAA Put this in the To box

I used all steel rod ends here. Some what over kill
at 1/2 inch size. Like a factor of 100 but they don't
weigh much :) The QuestAir Venture uses 5/16th for the TIO 550.
I will try these and they can be changed out if too much
noise or vibration gets through.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.