I now have a real weight for a short block of my single rotor engine. It
is 94lb as shown in the pictures. Should be under 150lb when complete
later this week.

Richard Sohn
N2071U

Nice work Richard. I take it those are new castings.

Paul Lamar



Richard

Well done.  Your years of work have resulted in an elegant package.  A question. On the upper right of the accessory case, there appears to be mount area for a water pump and its' inlet.  If so, is there now a barrier cast into the casing near the original inlet so the cold water is separated from the widened outlet ?

Doug in Japan