I now have a real weight for a short block of my single rotor engine. It
 is 94lb as shown in the pictures. Should be under 150lb when complete
 later this week.

 Richard Sohn
 N2071U

 Nice work Richard. I take it those are new castings.

 Paul Lamar



Richard

Well done.  Your years of work have resulted in an elegant package.  A
question. On the upper right of the accessory case, there appears to be
mount area for a water pump and its' inlet.  If so, is there now a barrier
cast into the casing near the original inlet so the cold water is
separated from the widened outlet ?

Doug in Japan



Jes Doug, there is a barrier pretty much like in the oirginal MAZDA housing.

Richard Sohn
N2071U