I now have a real weight for a short block of my single rotor engine. It
 is 94lb as shown in the pictures. Should be under 150lb when complete
 later this week.

 Richard Sohn
 N2071U

 Nice work Richard. I take it those are new castings.

 Paul Lamar

Wow that is a really neat job, I assume the "front" flange is for
driving the accessories and the main drive will be from the flywheel
end? has it a heavy flywheel balanced for the single rotor? or you going
to use the auto flexplate with the auto balance?  looks a very good job.
      John Burey

Here are some additional old pictures for back ground info.

Paul Lamar