Subject: C-6 tranny derived re-drive
From: Rotary Engine
Date: 3/3/2011, 2:21 AM
To: AAA Put this in the To box


Are there accurate plans available to make you own re-drive? I got
the how to convert a rotary to aircraft book expecting a step by
description with some engineering drawings more less. I expected  home built
plans like Mustang aeronautics Midget Mustang plans but I guess I was
not under standing what was being offered when I ordered it. Anyway any
experienced advice would be appreciated. Does anyone have or know of
any videos of any completed installations actually flying their home-built
with the Mazda engine? Thanks in advance for your help.

David Parker.


I expect you are referring to Tracy's book.
"Aviator's Guide to Mazda Rotary Conversion" It assumes you will buy
Tracy's gearbox and EFI system. There is some stuff in there on building
a motor mount. I also have a book out called "How to Cool Your Wankel".

I have free service for supplying motor mount dwgs. You tell me what kind of
airplane you are building and I will send you the planes for building a motor
mount based on an off the shelf motor plate from Jeff Doddridge. Here is an example for a Mustang II. This uses the old Schertz beam motor mount bracket however I can quickly redo the dwgs for the new motor plate. Look them over and see if there is something you don't like and I can change it quickly. When you get what you want I will send you the dwgs with dimensions. We also work with a company here in So Cal that can make the motor mount for you if you wish. DoRite Fabrication in Ventura.

If you want to build your own C6 based gear box we have the same service.
I show you a few suggestions and you pick out what you think you can
make and I will send you some suggested dimensions and dwgs that fit the motor
plate. I also work with a couple of machinist here in so cal that can make
anything.

We have been doing all this going on 12 years now.

I don't know of any step by step videos out there except for over hauling
rotaries.

Paul Lamar


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.