I have one of Tracy's early PSRU with the roller
helical gear thrust bearing. Tracy changed it out
for multiple needle bearings. Does anybody
know whether he uses two or three needle bearings
back to back? I am in the process of upgrading it
now.
Is the motor plate counter bored?
Paul Lamar
Two, my RD-1-C purchased last year.
C. Smith
Thanks C.
Paul Lamar
Paul, If you don't want to counter bore the plate you might use a snap
ring to bottom the seal against.
george
It is counter bored from the other (back) side for the oil seal and
I have no
problems with that. I just added up the double needle bearing stack
and it comes to 7 + 4 + 1 = 12 MM total. Two 3.5 mm thick washers
two 2 mm
needle bearings and one 1 mm thin separator. There is marginal room
between the
helical sun gear and adapter plate. As I recalled Tracy counter
bored the front
of the plate for the needed clearance but I could be wrong. The sun gear
is way longer than necessary so I think I can take off one or two
millimeters
in that area. Here is a picture of the early roller thrust bearing which
turned out to have inadequate life. Doubling the needle bearings halves
the RPM of each bearing greatly extending the life. Ross was the
first to
come up with the idea I think. All of Tracy's boxes have this
feature and it
happened a year or less after the first box was sold. It could be eleven
years now.
Paul Lamar
Paul, there are some spacers and stuff in the bearing stack, I can
send you a
picture tomorrow if you want.
C. Smith
That would be great C. I tired calling Tracy today but I did not
make it before
4PM EST. I am sure he would fix it for me but the shipping both ways
would
be a lot. It is quicker and easier for me to do it.
Paul Lamar
Here they are. Sorry, I got side tracked by some other comitments.
Hope this
helps.
C. Smith
Just what I was looking for C.
Thanks
Paul Lamar
-
Question I am changing my redrive and got the parts from Tracey and
he sent two thrust bearings and I thought they went one on each side
of sun gear so do you not use a thrust bearing next to planitary
carrierThanks Keith building rv7 with 13b
Just answered.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.