This seems like inconsequential detail but a loose 6 mm bolt here
can cause a lack of oil pressure which will seize
the bearings in any engine. I used a socket head metric
screw because it is easier and quicker to drill the head for
safety wire.
Paul Lamar
Paul,
Funny, we were just going over that on Sunday. You should also do
the same
with the oil pump bolts or any other low torque bolts.
Larry
Any objection to thread locking compounds?
Ed Carver
No but Safety wire gives one a warm fuzzy feeling that it is there
and obviously working :)
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.