Subject: FUKUSHIMA --- Zircaloy turbines
From: Rotary Engine
Date: 3/15/2011, 11:51 PM
To: AAA Put this in the To box



Hi Paul,
Check out this article on the nuclear reactors in Japan.
There is a brief mention of how water is dissociated when it gets hot
enough.
Cheers Chris in nz.
http://bravenewclimate.com/2011/03/13/fukushima-simple-explanation/
------------------------------------------------------------------------
"Zircaloy with a melting point of 2200 °C" 4000 F
Zircaloy-4 (Zry-4) consists of 98.23 weight % zirconium with 1.45%
tin,
0.21% iron, 0.1% chromium, and 0.01% hafnium.

Zirconium (Zr) is a grayish-white, metallic element with an atomic
number of 40. It naturally combines with silica and oxygen to form
the  mineral zircon (ZrSiO4), the primary ore of this element.
Zircon has  been known since biblical times, and it has been called
by a variety of  names, including jargon, hyacinth and jacinth.
In the late 1700?s, the German chemist Martin Heinrich Klaproth
suspected that there was a new element to be found in this
mineral. He  reduced the mineral zircon to zirconium oxide in 1789,
 but never  isolated the metal. In 1824, Swedish chemist Jöns Jacob Berzelius
isolated an impure zirconium metal, but it wasn?t until 1914 when pure

zirconium was finally produced.
Zirconium reacts with oxygen, forming a thin coating of zirconium oxide
on its surface. This coating protects the metal from further oxidation.

Zirconium is quite resistant to corrosion by acids and other
chemicals,  and is valued in industry for this resistant quality.
Zirconium has no beneficial or adverse effect on living organisms,
and  is resistant to corrosion. Based on these properties, it has
proven to  be a good material for artificial limbs and joints.
Analysis of the rocks collected on the moon has shown that
zirconium is  a common element on the surface of the moon.
Fourteen million tons of zirconium are in heavy-mineral sand
deposits in  the United States. The sands are called zircon sands
because they  contain sand-sized mineral zircon grains. Most heavy-
mineral sands also  have a high content of titanium-bearing minerals,
 such as ilmenite and  rutile.

Several American metal companies in Oregon and Utah recover zirconium
metal when recycling scrap metals created during metal production.
Zirconium chemicals (like zirconium dioxide) are made in Alabama, New
Hampshire, New York and Ohio.

We could use some of that stuff for a turbo and turbo compound
turbine for the rotary let alone mufflers.

I extrapolated some strength data I found based on the 2700 C melting
temperature. Looks a lot stronger at high temp than valve steels.

What is really great about it is the density. It is about half way
between steel and aluminum at .2 pounds per cubic inch. That means
it  will make great turbine blades.
Paul Lamar

Or a great material for a light weight rotor?
 Mark LaPierre


The weight of Zircaloy will be close to Zirconium as it is 98% Zr. The density
will be close to 0.23452 lb/in3. Inconel is 0.296 lb/in3. Not a lot of weight
saving there. Titanium is 0.163 lb/in3. Titanium Aluminide is lighter yet. A
composite rotor made of Titanium Aluminide and Berylium Aluminium may be the
answer for the light weight rotor. Not much gain for the cost.

Dale Davies


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.