Subject: Visit to Randy Lewis Aluminum solder
From: Rotary Engine
Date: 3/25/2011, 8:53 AM
To: AAA Put this in the To box

Went over to Randy's house this evening to have a look at the progress he is making on his turbo one rotor powered Dragon Fly.

He showed me some machined beads he aluminum soldered on to the cooling system aluminum tubes. The stuff is called Alumiweld but is a true solder in that it melts at 730 F. All you need is a butane torch.
Works best like any solder if there is a fairly large area of parallel contact to allow capillary action.

The amazing thing is it works without flux.
Just clean the aluminum with a SS brush to get rid of the oxide coating.

It is claimed to be stronger than the base aluminum.
Up to 40,000 psi tensile strength.
18,000 to 30,000 shear strength.

The address is Master Marketing Products
1304 53rd Ave
West Bradenton Fl.
34207

It is also sold at Harbor Freight.
Randy was lucky to find tubing with the same ID as the cooling tube OD or near enough to cut off some narrow beads from the larger tube.

Paul


Paul,

Here is the web site for the Alumiweld
http://www.alumiweld.com/index.html

And here is a shot of the Harbor Freight add.

Randy


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.