Subject: Visit to Randy Lewis Aluminum solder
From: Rotary Engine
Date: 3/25/2011, 10:45 AM
To: AAA Put this in the To box



Went over to Randy's house this evening to have a look at the
progress he is making on his turbo one rotor powered Dragon Fly.

He showed me some machined beads he aluminum soldered on to the
cooling system aluminum tubes. The stuff is called Alumiweld but is a
true solder in that it melts at 730 F. All you need is a butane torch.
Works best like any solder if there is a fairly large area
of parallel contact to allow capillary action.

The amazing thing is it works without flux.
Just clean the aluminum with a SS brush to get rid
of the oxide coating.

It is claimed to be stronger than the base aluminum.
Up to 40,000 psi tensile strength.
18,000 to 30,000 shear strength.

The address is Master Marketing Products
1304 53rd Ave
West Bradenton Fl.
34207

It is also sold at Harbor Freight.
Randy was lucky to find tubing with the same ID
as the cooling tube OD or near enough to cut off
some narrow beads from the larger tube.

Paul


Guys,

That is a zinc rod.  Practice with propane or map torch to get it moving.
It will work, but the key is keeping everything clean, and vigorous scrubbing.

To get a cleaner joint, go with Kent White's Aluminum solder. This stuff is an aluminum
alloy (not zinc), but with flux flows very nicely.  Machined up some fittings from 6061,
and soldered in place.

http://www.tinmantech.com/html/aero_solder.php

Yes, I'm still practicing OA welding aluminum.  I still suck at that! :)

Tom

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.