The attached picture is from my single rotor PP engine after about 10
hrs running time. Most of the time was running at WOT and 6000RPM. fuel
flow was around 8gph.
If this an indicator of mixture distribution at ignition, what does it
mean? if anything. Has that been observed by anyone else?
Richard Sohn
N2071U
Richard,
I've got 3 sets of housings that look similar. This one is from the semi-
pport project currently on the bench.
Todd
What are the details of your cooling system Todd? Stock water and pulleys?
Hose size to rad and from rad? where are you measuring the water temperature?
The coolant water temperature is not the whole story.
If it is a stock cooling system and the temperature is within limits
you might want to modify the rotor housings. You only need to do this around
the lower spark plug.
Paul
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.