All you composite guys. Are any of you using a epoxy mixing pump?
If so which one and how much did you pay for it?

I see one on Aircraft Spruce for $266.95.
Sounds too expensive.

Paul Lamar


I've used this one for years....it's a good one.

http://www.aircraftspruce.com/catalog/cmpages/epoxypump.php

Sandy McNabb
Renesis in a Glass Goose

Can you email a picture of it Sandy? I am curious about
how it works. What mechanism is used?


Paul Lamar


Paul,

Depending on resin/hardener mixture ratio and product volume needed, the West
System Epoxy pump family has been around for quite a while in the marine
industry, is reasonably priced and readily available. You can find info about
their product line here:

http://www.westsystem.com/ss/pumps-and-metering-equipment

West System pumps, resins and other products are available through outlets like
Jamestown Distributors here on the east coast
http://tinyurl.com/3cu3dy4 , or West Marine
http://www.westmarine.com/webapp/wcs/stores/servlet/SiteSearch?Ns=Most%20Popular|0


Jack Hilditch