All you composite guys. Are any of you using a epoxy mixing pump?
If so which one and how much did you pay for it?

I see one on Aircraft Spruce for $266.95.
Sounds too expensive.

Paul Lamar


I've used this one for years....it's a good one.

http://www.aircraftspruce.com/catalog/cmpages/epoxypump.php

Sandy McNabb
Renesis in a Glass Goose

Can you email a picture of it Sandy? I am curious about
how it works. What mechanism is used?


Paul Lamar

Yes, I too used the one from Michael's Engineering for all my structural build with very good results.

While it is very easy to use scales too and I use them now for my residual layups and finishing (mixing micro with epoxy for you non composite guys/gals), the scales were always spot on and even easier to use.

Since I have not used it in a very long while, it is in serious need of a good cleaning, however, I would strongly recommend its use.

Chris Barber
Velocity N17010

Frightfully close to possible first flight


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.