Subject: New oilpan for the KIS.
From: Rotary Engine
Date: 4/5/2011, 10:24 PM
To: AAA Put this in the To box

Industrial metals cut all the parts to size
and Randy Lewis of one rotor Dragon Fly fame
tig welded it up for me. Randy is a fast learner
as he has limited experience tig welding.
He practiced for only one day and then did
this pan. It holds 8.5 quarts.
The more oil the longer it takes to overheat it on
take off :) My 230 HP O-470 has 12 quarts.

It is not tapered due to improvements in ducting
for the water rad under the engine. I used
to bring the cold air in from the bottom of the
rad. It is better to bring it in on the top
and let it go out the bottom.

I'll sell the old one if somebody wants a bargain.
$100

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.