Subject: New oilpan for the KIS.
From: Rotary Engine
Date: 4/6/2011, 4:20 PM
To: AAA Put this in the To box


 Industrial metals cut all the parts to size
 and Randy Lewis of one rotor Dragon Fly fame
 tig welded it up for me. Randy is a fast learner
 as he has limited experience tig welding.
 He practiced for only one day and then did
 this pan. It holds 8.5 quarts.
 The more oil the longer it takes to overheat it on
 take off :) My 230 HP O-470 has 12 quarts.

 It is not tapered due to improvements in ducting
 for the water rad under the engine. I used
 to bring the cold air in from the bottom of the
 rad. It is better to bring it in on the top
 and let it go out the bottom.

 I'll sell the old one if somebody wants a bargain.
 $100

 Paul Lamar


Does your oil pan fit on the rx-8 13B??if so i am interested to buy and
also the sketch for second one

Jean Prudhomme

Mine won't fit the RX8 Jean. They have a different bolt pattern.

Hey Randy, Do you want to make another oil pan for Jean?


I think I have a stock RX8 oil pan to get the bolt pattern
from. If not you will need to ship me yours Jean.


Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.