Hi Paul
Hope all is well? Im currently busy building a s5 13 b p-port will it
be possible to fit the RX 8 renisis rotors and if yes what do I need
to change? Or swap over to the s5 to make it work?
Regards
Barend.
Old message:
---------------------------------------------
The RX8 high powered stationary gears are a cheap upgrade for the older
pre93 rx7 engines.
Take a look at the racing beat tech tips.
http://www.racingbeat.com/mazda/performance/rotary-tech-tips/rotors.html
In particular, look at race clearancing (beveling) the rotor tips for
the older S5 NA 9.7 rotors.
Run higher oil pressure.
Lynn and others have posted high rpm mods in places such as . e.g.
pinning rotor bearings
www.nopistons.com <http://www.nopistons.com
The Racing beat tech tips are definitely worth a read for anyone that
hasn't seen them. Years ago you had to buy their book for this valuable
information.
Doug mentioned 8300 TO and 9000 redline.
At or above 8500rpm, Racing beat recommends reliability mods.
carbon/ceramic apex seals are recommended above 9k.
Cheers
Cary
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.