Good evening Mr. Lamar and other rotary people,

I have a starting problem with my rx8, 2004, hi-power version. 108 000 KM.
My car will not start. I replace apex seals and all parts which was bad,
but engine not start too.  I replace starter 2004, e-shaft position
sensor, igniton coil + cables, spark plugs, knocking sensor, throttle
body activator,  SSV actuator,. Engine allways wont start, but  when we
pushing car, on 10 metres car start, and car drive ok, but engine has a
unstable idle, 750 -1500.
Please help me.
Michal

You need to get an OBD II program for your PC computer and a special
cable that connects to the OBD II connector under the dash.
That will tell you what is wrong.
Obviously none of the stuff you changed so far was the problem.

http://www.scantool.net/
http://www.obdsoftware.net/
http://www.myscantool.com/
http://www.obddiagnostics.com/
http://www.obd-2.com/
http://www.autotap.com/
http://www.obd2crazy.com/

Paul Lamar