seeing your articles I was interested by the Wankel engine. How can I
buy a used engine and how to prepare for use in an aircraft. need for
engines of 100 hp and 180/260.

thanks
Ivan

The best way is buy a running 1989 to 1992 RX7 car for under $2500
if you can find one.


Paul Lamar



Where the motors are among 180/200hp? There are companies that work with
the engine rebuilt?

ivan

180 to 200 HP is no problem. 250 HP is just as cheap. You don't
need to use it all. Just block the throttle.

My favorite engine builder is MazdaTrix in Signal Hill Ca.
Every rebuilt engine is run on the bench. They also have a dyno if
you want it dynoed.

Paul Lamar



Lamar
Examining the engines, realized its simplicity and efficiency. I
visit de site of your engine built indicates...there are many
possibilities...which should i chose for 180/250 hp and specifically
for 80/110 hp max.


I am Brazilian and interest in releasing the engine in Brazil, but
would like to see the possibilities and costs.  the first, 80/110hp to equip my project that is flying for 15 years.
The second, 180/250 hp  for a project of a canard configuration,
four  places as the velocity, but with high wings and vertical
stabilizers near to the body of the aircraft.

There are also kits for experimental aircraft that would be
interesting to use a 180/250 hp, like cose and velocity being
assembled here.

Ivan