Guys,
Hope I'm not intruding here. I've been reading all the emails for a
couple weeks now. Fascinating. You guys are really interesting.
I saw
Paul's articles on "compound turbo charging" while looking for
info on
V-8's for airplanes. Been reading what I can find on rotaries every
since. I remember when they first came out with them. I thought
they
were going to be the last word in engines.
I used to ride bucking horses in the 70's and had a F model
Bonanza that
I rodeod in. Loved that plane. Could land it on a wet runway in bad
cross wind with no problem. Lear jet broke my tail once when
tied down
in Butte Mt. Anaconda Mining had to rent me a plane while my Bonanza
getting fixed. Drove a new 182 for little less than a month.
Put 100
hrs on it. Hated it. Like flying a box kite. Sold Bonanza when
quit
rodeoing. Bought a 180. No tail dragger time when I picked it
up in
Maryland. Flew for 2 yrs before accidentally learned to do wheel
landings. Scary plane til then. Off the run way many times but
never
damaged.
All that to say that I have been thinking of building a plane for
quite
awhile. I am a finish carpenter and can build balanced and blue
printed
V-8s. Can also weld. But, I am wondering if a person could put a
rotary in a Bonanza. Saw interesting article from EPI saying no.
What
do you think. What about any production aircraft--like a super cub.
I'm a perfectionist. If I build a rotary, I would probably want to
turbo it and fuel inject it.
Lastly, I'm wondering how hot it is at Oshkosh. I'm not real good at
dealing with heat but I would like to camp out if possible.
Would like
to be able to visit late and early instead of staying in town and
taking
the bus. This I need to know asap so I can get a room before all
gone
if the bedroll is a no go.
I won't bother you all with long emails again but just wanted to say
hello and keep up the good and interesting work. I'm going to get
involved.
Van Vannoy
Van,
I am just a guy who likes sharing informational resources with
others,
and who
might be at about the same point in this interest as you
are. From your
expressed interests I recommend reading in order 1. Paul Lamar's
article from the
February 2011 Kitplanes magazine [attached at the end of this
email...] 2. Street
Rotary by Mark Warner 3. everything on Paul Lamar's
website:
http://rotaryeng.net
4. How to Cool Your Wankel by Paul Lamar5. Fundamentals of
Turbocharging
by Nicholas Baines 6. Street Turbocharging by Mark Warner 7.
Aviator's Guide
to Mazda Rotary Conversion by Tracy Crook 8. all books by Tony
Bingelis includ-
ing Firewall Forward, Tony Bingelis on Engines, Sportplane
Construction Tech-
niques [the Bingelis books not for the engine itself, but for many
other things],
9. rotary engine rebuilding videos such as from Bruce Turrentine or
"DIY-RE 13B"
video series from
http://www.diy-re.co.nz 10. The Aeroelectric
Connection by Bob
Nuckolls, for aircraft electrical systems.
Also, don't forget about the Experimental Aircraft Association, which
gives periodic
workshops, has an online bookstore and has the annual
"AirVenture" fly-
in at Osh
Kosh Wisconsin.
The above resources are fun and easy reading, and very practical. At
the very
least, I am confident they will allow ME to ask better questions of
the experts if not
empower me to do much of it myself.
Gene Kahn
Thanks for pages 2 and 3. Read them but not all of article.
Van Vann
It is on the way.
Paul Lamar
Paul,
I thanked Gene. But, maybe it was you who sent last part. Anyway.
Fascinating article. I want to build that ultimate rotary!! Max fuel
economy and abundance of power. Wish I could just stick it in a
Bonanza. I saw one couple days ago for $9000 obo without engine or prop.
Van
Gene sent it to me and I just forwarded it and wrote it :)
The rotary will burn auto gas so that is a buck a gallon cheaper.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.