Subject: bucking horses Kitplanes 3rd part Book list
From: Rotary Engine
Date: 5/2/2011, 8:41 PM
To: AAA Put this in the To box


 Guys,

 Hope I'm not intruding here.  I've been reading all the emails for a
 couple weeks now.  Fascinating.  You guys are really
 interesting.  I saw
 Paul's articles on "compound turbo charging" while looking for
 info on
 V-8's for airplanes.  Been reading what I can find on rotaries every
 since.  I remember when they first came out with them.  I
 thought they
 were going to be the last word in engines.

 I used to ride bucking horses in the 70's and had a F model
 Bonanza that
 I rodeod in.  Loved that plane.  Could land it on a wet runway
 in bad
 cross wind with no problem.   Lear jet broke my tail once when
 tied down
 in Butte Mt.  Anaconda Mining had to rent me a plane while my
 Bonanza
 getting fixed.  Drove a new 182 for little less than a month.
  Put 100
 hrs on it.  Hated it.  Like flying a box kite.  Sold Bonanza
 when quit
 rodeoing.  Bought a 180.   No tail dragger time when I picked it
 up in
 Maryland.  Flew for 2 yrs before accidentally learned to do wheel
 landings.  Scary plane til then.  Off the run way many times but
 never
 damaged.

 All that to say that I have been thinking of building a plane
 for quite
 awhile.  I am a finish carpenter and can build balanced and blue
 printed
 V-8s.  Can also weld.  But, I am wondering if a person could put a
 rotary in a Bonanza.  Saw interesting article from EPI saying
 no.  What
 do you think.  What about any production aircraft--like a super cub.

 I'm a perfectionist.  If I build a rotary, I would probably want to
 turbo it and fuel inject it.

 Lastly, I'm wondering how hot it is at Oshkosh.  I'm not real
 good at
 dealing with heat but I would like to camp out if possible.
  Would like
 to be able to visit late and early instead of staying in town
 and taking
 the bus.  This I need to know asap so I can get a room before
 all gone
 if the bedroll is a no go.

 I won't bother you all with long emails again but just wanted to say
 hello and keep up the good and interesting work.  I'm going to
 get involved.

 Van Vannoy

 Van,

 I am just a guy who likes sharing informational resources with
 others, and who   might be at about the same point in this interest as you
 are.

From your   expressed interests I recommend reading in order

1. Paul Lamar's article from the February 2011 Kitplanes magazine [attached at the end of this   email...]

2.  Street   Rotary by Mark Warner

3. everything on Paul Lamar's   website:http://rotaryeng.net
 4.  How to Cool Your Wankel by Paul Lamar

5.  Fundamentals of   Turbocharging   by Nicholas Baines

6.  Street Turbocharging by Mark Warner

7.  Aviator's Guide   to Mazda Rotary Conversion by Tracy Crook

8. all books by Tony  Bingelis including Firewall Forward,  Tony Bingelis on                                                     Engines,  Sportplane Construction Techniques  [the Bingelis books not for the  engine itself, but for many  other things],

9.  rotary engine rebuilding videos such as from Bruce Turrentine or
 "DIY-RE 13B"   video series from  http://www.diy-re.co.nz

10. The Aeroelectric Connection by Bob
 Nuckolls, for aircraft electrical systems.

 Also, don't forget about the Experimental Aircraft Association,
 which   gives periodic  workshops, has an online bookstore and has the annual
 "AirVenture" fly-in at Osh  Kosh Wisconsin.

The above resources are fun and easy reading, and very
practical.  At   the very   least, I am confident they will allow ME to ask better questions of   the experts if not empower me to do much of it myself.

 Gene Kahn



Fascinating Gene.  Thanks.

Van



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.