Subject: Full size carbon fiber spinners
From: Rotary Engine
Date: 5/11/2011, 10:19 PM
To: AAA Put this in the To box



 --Paul

 I have 3 or 4 Berkut carbon spinners I'll have to measure them. if you
want one of those.

 Tony


I think I need an 18 inch but I'll double check tomorrow. It may be only
16 inch.

Paul Lamar




If they are 18" I would take one of those.

Bob Mears

Paul,
I have a 16" carbon fiber spinner with a carbon fiber spinner that I am
not using.

Brian Trubee


How much Brian?
Is there a backing plate and a support bulkhead?
Got any pictures?

Paul Lamar



It has the rear bulkhead, the guy that made it said it didn't need the
front. I don't know, I've never installed it. I went with the fiberglass
one from a midget mustang. I'll let you have it for the cost of shipping
if you want it. I'll get you some photos of it tomorrow, it's up at the
hangar.

Brian Trubee

OK Brian Thanks.

Ill take it.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.