Subject: fuel injector pulser/tester
From: Rotary Engine
Date: 5/18/2011, 11:12 PM
To: AAA Put this in the To box

Parts list:
1 - Radio Shack proto type circuit board
2 - 555 timer 8 pin DIP chips
3 - 100 ohm resistors - R1, R5, R9
1 - 470 ohm resistor - R6
3 - 100 K ohm resistors - R2, R3
1 - 10 ohm resistors - R8
1 - Meg ohm resistor - R4
1 - 47 mF capacitor - C1
1 - 22 mF capacitor - C7
3 - 0.1 mF ceramic disc capacitor - C2, C3, C6
1 - 1 mF Tantalum capacitor - C4
1 - 4.7 mF capacitor - C5
1 - 1N4002 diode D1
1 - 1N4742 12v Zener diode - D2
1 - Red LED 12v rated
1 - Green LED 12v rated
1 - N-Channel MOSFET transistor - Q1
Radio shack part #276-2072
1 - Momentary contact switch - SW3
2 - spdt switches - SW1, SW2
2 - Aligator clips
A few feet of double strand wire
1 - Project enclosure box
any questions you can also go to
www.dinofab.com/fuel_injector_tester.html
<http://www.dinofab.com/fuel_injector_tester.html>

Javier
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.