Subject: hi! i got a blueprint for fuel injection!! you may like..
From: Rotary Engine
Date: 5/18/2011, 11:11 PM
To: AAA Put this in the To box



MegaSquirt 1 EFI system cost like $145 unassembled also a Mazda RX7 ECU
can be reprogram able, I have done it too. the non-turbo ECU can be
run by a turbo engine as long as you keep constant upper RPM from
anywhere of 3000RPM and up, the ECU actually gives a faster acceleration
and a bit more HP in the upper RPM and I had prove it by

1: I'm Puerto Rican and love Rotarys

2: I ran my best of 11.90 with an stock
turbo rotary in a 83' Mazda RX7 with the ECU set up and it has a number
326 stamped either on top or side of ECU and if you love to experiment
let my know and i will give a free explanation on reprograming a Mazda
ECU.

I will send you a mini blueprint of a fuel injector
pulser or I will send the link

oooh by the way I also got the same one I
built it couple years ago...thank you and if you got any questions I'll
be more that glad to help....on anything from
machining,fabricating,building,reprogramming also I will send you some
links where you can get anything for Rotary's........

Javier

Sure Javier. Send us what you can. I know you guys are fast.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.