Subject: What does a Red Bull Formula 1 car have in common with a V22 Osprey?
From: Rotary Engine
Date: 5/22/2011, 8:41 PM
To: AAA Put this in the To box


 I just saw a video the wires hanging down from the Red Bull front
 wing pylons after a crash on the Speed Channel Spanish GP
 practice.

 The closer the wing is to the ground the more the down force.
 A lot more. I discovered this back in the late 1960's
 when I was working at Chaparral.

 There are at least two ways to use wires to change
 the bending stiffness of a front wing. First and simplest
 is to change the tension on the wires mounted near the top surface
 of the wing.
 Think of a composite I beam. The upper flange is in tension and the
 lower
 flange is in compression. Pretension a wire in the upper flange and
 the beam will be stiffer. Relax the tension and the beam will
 be more flexible.

 The second way is use stuff called Shape Memory Alloy.

 "The nickel-titanium alloys were first developed in 1962–1963 by the
 United States Naval Ordnance Laboratory and commercialized under the
 trade name Nitinol (an acronym for Nickel Titanium Naval Ordnance
 Laboratories). Their remarkable properties were discovered by
 accident. A sample that was bent out of shape many times was
 presented at a laboratory management meeting. One of the associate
 technical directors, Dr. David S. Muzzey, decided to see what would
 happen if the sample was subjected to heat and held his pipe lighter
 underneath it. To everyone's amazement the sample stretched back to
 its original shape."
 http://en.wikipedia.org/wiki/Shape_memory_alloy

 This stuff is being considered to change the twist of the
 Boeing VTOL V22 rotor blades. Less twist for take off and more
 twist for high speed cruise.
 http://www.rotaryeng.net/VTOL.html

 Paul Lamar


You should send this to David Hobbs.  Might win you a prize.

There was speculation that the wires might be from strain gauges to
measure the amount of wing deflection.  There is certainly a
significant difference between the droop of the RB front wings and the
McLarens and Ferraris.
jd

Not much point in measuring the strain on the wing. It is either strong
enough or not.

The presence of 3 wires indicates to me there is a possibility of controlling
each front wing individually. Since the lateral load transfer on the front suspension approach 100% from inside tire to outside tire it is desirable to unload the outside tire and load the inside tire with aerodynamic force. High lateral load transfer is what causes wheel lock up and tire smoke. I notice most drivers get lock up but seldom Red Bull drivers. Hamilton does it all the time.

I mentioned this load transfer phenomena in my Oct 1969 Road and Track
article "More About Cornering Power. Here is a screen shot from the pdf.

http://www.rotaryeng.net/Road-and-Track-69a.pdf

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.