Has somebody got or when can I look for a simplified diagram showing the
components for a turbo system on my Rx7.
I have a '85 Rx7 with the 13B engine and setup from the '87 model with a
top mount inter cooler. I would like to do a front mount
inter cooler conversion but I'm not sure of where it all fits together.
Also is it essential that I fit a blow off valve as the standard system
works quite well with nearly 300BHP on tap.
Regards
Gary Byfield
Perth
Western Australia
The best thing to do is get a 3D program like Rhino
and draw the complete turbo set up. This will tell
you if everything fits under the hood.
Here is one I did for an airplane using Rhino.
We have a few guys building Mazda powered aircraft
in Perth. One is flying at BinDoon airfield north
of Perth.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.