Subject: Rotary powered race boats!
From: Rotary Engine
Date: 6/2/2011, 11:11 PM
To: AAA Put this in the To box



 hi..again! I was just recently reading about Mazda Wankels Thermostat
 instead of taking it off why not try a Moroso Water Outlet Restrictor
 and they are cheap!!! like 7 or 8 bucks also you can make them or
 machine them you can get them at www.summitracing.com
<http://www.summitracing.com>,has
 <http://www.summitracing.com,has <http://www.summitracing.com,has/>
 any one tried reduction pulleys? like
 the one in the above pics from www.xtremerotaries.co
<http://www.xtremerotaries.co>
 <http://www.xtremerotaries.co <http://www.xtremerotaries.co/> they
 are made for high rpm engines it
 will help with cooling and reduce rotating mass freeing up some HP!!!!
 has anyone tried electric water pump? im just curious on this one and
 also it will free some more HP!!!....hope I helped on this one!
 Javier Perez
 You want to increase water flow in an aircraft engine and not restrict
 it.
 Same goes for an electric water pump.
 The water pump in a rotary consumes only 3 HP.
 Don't use an electric pump in an aircraft engine.
 Paul Lamar


 The guy that built the Endurance used 2 electric water pumps with speed
 controls on them.
 Darren

 First what is an Endurance?
 Paul Lamar


 Endurance was the name of his plane but I remember the guys name now, S
 Todd Bartrim. His plane got me interested in all things rotary,
that and
 I used to drive a RX3 30 or so years ago. He built a long range RV 9
 with a 13b....here is his page.
 http://www3.telus.net/haywire/RV-9/C-FSTB.htm

 Darren

 One can do a lot of stupid things to the rotary and get away
 with it if you live in the northern climes. If you over heat
 the metal in the rotor housing the engine will not necessarily stop
 running right away but your rotor housings will be damaged.

 This subject keeps coming up over the last 12 years so I put a new
 article on the web site about it.

 http://www.rotaryeng.net/electric-water-pumps.html

 Read it and find out why you don't want to use an electric
 water pump.

 Paul Lamar


 The restriction on the block outlet is a band-aid for a marginal
cooling
 system.  It's function is to raise the pressure by the water pump
within
 the block to give a few degrees more to the boiling point of the water
 based coolant.  The notion that slowing the coolant flow rate help
 cooling
 is persistent nonsense.  Has anyone tried NPG+ in their Wankels?  No
 water,
 370 degree B.P. no need for pressure cap.  http://www.evanscooling.com/
 It is required in Rotax four strokes.


 Murry I. Rozansky

We had many long discussions about it a few years back.  I have tried
it.  I was using it when I lost all my coolant and landed on a road in
2006.  You cannot run zero PSI.  All of mine squirted out past a 7 PSI
cap and that is why I landed on the road.  It is used in diesel engines
to raise the temp without boiling the coolant.  But we don't need or
want our temps as high as the boiling temp of regular 50/50 coolant.  At
a given temperature, Evans will not remove the heat as well as regular
coolant.

No benefit to our application.

--  David Leonard


got it Paul thanks for all this good info!

Javier Perez

BTW use a 30 psi pressure cap as mentioned in my book. That will
further increase the boiling temperature of 50 50 antifreeze.

Paul Lamar


Do you have a book, Paul?

Van

http://www.rotaryeng.net/how-to-cool12.html
Contact me with an email with the word PRIVATE
in the subject box for a special price direct.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.