Subject: Fuel plumbing for rotary engines
From: Rotary Engine
Date: 6/5/2011, 5:25 PM
To: AAA Put this in the To box

 The trouble with AN fittings is they are all male.
 The trouble with AN hose ends is they are all female.
 If you have three or more devices in series say; fuel pump,
 filter and pressure sensor you wind up with a string of
 stuff 2 feet long. Each device must be separated by a hose
 or pipe. Each hose or pipe is a minimum of 2 or 3 inches long.

 The trick is to use a 3D fuel rail in reverse.

 Here is a set up where there are two tanks. Each tank has
 a fuel pump. Each fuel pump has a fuel filter.

 The up side to this is if one tank, filter or pump fails you
 have a back up in the other tank, filter and pump.
 There are scenarios where this does not work out well but
 any system has bad scenarios.

 You merely select tanks with a toggle switch on that tank's fuel
 pump. Fuel is prevented from going to the other tank
 by a one way valve in the hi pressure Walbro pumps.

 Unfortunately with any EFI systems fuel must always be returned to the
 tank it is drawn from or in some cases fuel can be pumped
 over board through the vents. With this system an electric
 actuated valve is used to select which tank the fuel is returned
 to.

 A single common sump tank can be used but unless it is
 cooled the fuel will heat up due to being continuously re-circulated
 through the fuel rails on the engine.

 I digress.

 Here is the fuel rail in reverse trick.
 Explained by the drawings.

 Paul Lamar

not entirely true.

look here...

http://www.aeroquip.cc/fcm2971fbm2971-06x-06.aspx

and here...

http://www.aeroquip.cc/fcm2915fbm2915-06x-06.aspx

You may find a solution that will be both compact and simple.

William Mason

I am sure I won't. :)
In effect I have no fittings at all :)
Just a block of aluminum.

Try PegasusAutoRacing.com
They have the largest collection of AN fittings I have found so far.

Paul Lamar

!@#$%%^ (cursing :)

The limitations of 3/8 aluminum tubing plumbing bit me today. I was not
able to get a simple right angle connection in the space available
due to the limitations of flaring tools and the fact the sleeve will
not slide around 90 degree bends. I used a lever tube bender.

wont-work.jpg

Ideally if one were starting from scratch one would move the fuel pump
back and inch or two but I did not want to punch yet another hole in the
structural fuse skin.

Plan B: The next thing I tried was the 270 degree helix trick. A lever tube
bender will not bend 270 degrees. Max bend is 180 degrees. So I had to go
with
the spring bender. The problem with that is you can not get the spring off
the
tubing after it is bent 270 degrees unless it is bent around a 2 inch
diameter
or larger rod or pipe. Even 2 inches is  marginal. That started to get too
close
to the control mechanism and the aft panel. I spent all day on it and
it was a pain in the butt.

270-degree-trick.jpg

Plan C: to be tried next week is connect the right filter to the left
fuel pump and the left filter to the right fuel pump next week when I get
some
more tubing. Fortunately there is room under the controls. Plan-C.jpg

It is tough squeezing all this stuff under the floor of an RV4,

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.

Paul,
Check out Livermore performance

http://www.livermoreperformance.com/xrp_adapters.html

They have female AN fittings, including 90*
Engine > Plumbing > XRP AN Adapters




Adapters
Flare Male to NPT - Straight  Flare Male "T" to NPT  Flare Fem. Swivel to
NPT  Bulkhead Nut  Tube Nut/Sleeve
Flare Male to NPT - 45°  Flare Male "T" to Flare Swivel  Flare Fem. Swivel
to Fem. Couplings  Reducers and Expanders  Gauge Adapters
Flare Male to NPT - 90°  Flare Male "T" - Stepped  Flare Fem. Swivel to
Flare Male  Flare Male Plug / Fem Cap  Weld Ons
Flare Male to Flare Male  Flare Male Swivel to NPT  Flare Male Bulkhead
Union  NPT Adapters  Quick Disconnect

Technical Information


--------------------------------------------------------------------------------

ALUMINUM ADAPTER FITTINGS
All male flare adapters are JIC 37°. Most adapter fittings are also
available in both steel and stainless. To order steel - change the first
digit of the part number from a ?9? to a ?4? EXAMPLE: 981606 changes to
481606. To order stainless - change the first digit of the part number from
a ?9? to a ?5? EXAMPLE: 981606 changes to 581606.

MALE FLARE TO NPT PIPE ADAPTERS - Straight Aluminum, Super Nickel Plated &
Steel

  Aluminum      Steel

Size  Blue  Black  Super Nickel  Short  Extended  X Long
AN NPT  P/N Price  P/N Price  P/N Price  P/N Price  P/N Price  P/N Price
-2 1/8"           481602 $2.62
-3 1/8  981603 $2.56  981603BB $3.08  981603SN $3.19  481603 $1.71  481673
$17.42  481683 $24.68
-3 1/4  981634 $13.63  981634BB $16.37  981634SN $17.05  481634 $34.11
-3 3/8  981636 $8.69  981636BB $10.44  981636SN $10.87
-4 1/8  981604 $2.56  981604BB $3.08  981604SN $3.19  481604 $1.71  481674
$11.14  481684 $20.90
-4 1/4  981644 $2.93  981644BB $3.52  981644SN $3.66  481644 $1.54
-4 3/8  981646 $8.69  981646BB $10.44  981646SN $10.87  481646 $2.27
-6 1/8  981662 $3.42  981662BB $4.11  981662SN $4.28  481662 $1.22
-6 1/4  981606 $2.75  981606BB $3.30  981606SN $3.43  481606 $1.40
-6 3/8  981666 $3.56  981666BB $4.28  981666SN $4.45  481666 $1.92
-6 1/2  981668 $5.41  981668BB $6.48  981668SN $6.76  481668 $2.05
-8 1/4  981607 $3.69  981607BB $4.42  981607SN $4.61  481607 $2.39
-8 3/8  981608 $3.69  981608BB $4.42  981608SN $4.61  481608 $2.39
-8 1/2  981688 $5.41  981688BB $6.48  981688SN $6.76  481688 $2.87
-8 3/4  981609 $10.25  981609BB $12.29  981609SN $12.80  481609 $3.39
-10 1/4"           481699 $6.80
-10 3/8  981611 $6.14  981611BB $7.37  981611SN $7.69  481611 $3.71
-10 1/2  981610 $5.49  981610BB $6.58  981610SN $6.87  481610 $3.39
-10 3/4  981613 $10.25  981613BB $12.29  981613SN $12.80  481613 $3.81
-12 3/8"           481622 $17.92
-12 1/2  981614 $10.25  981614BB $12.29  981614SN $12.80  481614 $3.81
-12 3/4  981612 $10.25  981612BB $12.29  981612SN $12.80  481612 $3.81
-12 1  981615 $22.80  981615BB $27.37  981615SN $28.51  481615 $5.30
-16 3/4  981617 $20.49  981617BB $24.59  981617SN $25.61  481617 $5.83
-16 1  981616 $18.79  981616BB $22.53  981616SN $23.48  481616 $5.43
-20 1  981621 $45.79  981621BB $54.94  981621SN $57.24  481621 $11.48
-20 1 1/4  981620 $45.79  981620BB $54.94  981620SN $57.24

MALE FLARE TO NPT PIPE ADAPTERS - 45° Aluminum, Super Nickel Plated & Steel

  Aluminum       Steel

Size  Blue  Black  Super Nickel
AN NPT  P/N Price  P/N Price  P/N Price  P/N Price
-3 1/8  982303 $8.17  982303BB $9.80  982303SN $10.23  482303 $8.85
-3 1/4  982334 $9.80  982334BB $11.76  982334SN $12.25
-3 3/8  982336 $16.65  982336BB $19.98  982336SN $20.83
-4 1/8  982304 $8.30  982304BB $9.96  982304SN $10.38  482304 $5.05
-4 1/4  982344 $8.53  982344BB $10.25  982344SN $10.67  482344 $5.89
-4 3/8  982346 $16.65  982346BB $19.98  982346SN $20.83
-6 1/8  982362 $10.25  982362BB $12.29  982362SN $12.80  482362 $7.17
-6 1/4  982306 $8.53  982306BB $10.25  982306SN $10.67  482306 $4.75
-6 3/8  982366 $11.47  982366BB $13.75  982366SN $14.33  482366 $6.36
-6 1/2  982368 $18.60  982368BB $22.32  982368SN $23.25  482368 $5.59
-8 1/4  982307 $14.64  982307BB $17.56  982307SN $18.30  482307 $8.04
-8 3/8  982308 $10.37  982308BB $12.44  982308SN $12.95  482308 $4.75
-8 1/2  982388 $16.47  982388BB $19.76  982388SN $20.59  482388 $7.17
-8 3/4  982309 $26.07  982309BB $31.27  982309SN $32.58  482309 $13.82
-10 3/8  982311 $18.30  982311BB $21.96  982311SN $22.87  482311 $8.06
-10 1/2  982310 $16.33  982310BB $19.60  982310SN $20.42  482310 $8.06
-10 3/4  982313 $24.39  982313BB $29.29  982313SN $30.50  482313 $19.08
-12 1/2  982314 $24.39  982314BB $29.29  982314SN $30.50  482314 $10.67
-12 3/4  982312 $24.39  982312BB $29.29  982312SN $30.50  482312 $9.98
-12 1  982315 $44.37  982315BB $53.24  982315SN $55.46  482315 $15.50
-16 3/4  982317 $44.37  982317BB $53.24  982317SN $55.46  482317 $16.34
-16 1  982316 $38.42  982316BB $46.11  982316SN $48.03  482316 $14.39
-20 1  982321 $76.40  982321BB $91.68  982321SN $95.51
-20 1 1/4  982320 $46.03  982320BB $55.25  982320SN $57.55  482320 $22.57

MALE FLARE TO NPT PIPE ADAPTERS - 90° Aluminum, Super Nickel Plated & Steel

  Aluminum      Steel

Size  Blue  Black  Super Nickel  Short  Extended  X Long
AN NPT  P/N Price  P/N Price  P/N Price  P/N Price  P/N Price  P/N Price
-3 1/8  982203 $8.17  982203BB $9.80  982203SN $10.23  482203 $6.35  482273
$22.89  482283 $22.89
-3 1/4  982234 $8.87  982234BB $10.65  982234SN $11.09
-3 3/8  982236 $16.65  982236BB $19.98  982236SN $20.83
-4 1/8  982204 $8.30  982204BB $9.96  982204SN $10.38  482204 $4.84  482274
$8.63  482284 $11.71
-4 1/4  982244 $8.53  982244BB $10.25  982244SN $10.67  482244 $3.60
-4 3/8  982246 $16.65  982246BB $19.98  982246SN $20.83
-6 1/8  982262 $10.25  982262BB $12.29  982262SN $12.80  482262 $4.11
-6 1/4  982206 $8.53  982206BB $10.25  982206SN $10.67  482206 $3.84
-6 3/8  982266 $11.47  982266BB $13.75  982266SN $14.33  482266 $4.68
-6 1/2  982268 $18.60  982268BB $22.32  982268SN $23.25  482268 $7.50
-8 1/4  982207 $14.64  982207BB $17.56  982207SN $18.30  482207 $6.26
-8 3/8  982208 $10.37  982208BB $12.44  982208SN $12.95  482208 $4.83
-8 1/2  982288 $16.47  982288BB $19.76  982288SN $20.59  482288 $6.39
-8 3/4  982209 $26.07  982209BB $31.27  982209SN $32.58  482209 $9.52
-10 3/8  982211 $18.30  982211BB $21.96  982211SN $22.87  482211 $7.59
-10 1/2  982210 $16.33  982210BB $19.60  982210SN $20.42  482210 $7.57
-10 3/4  982213 $24.39  982213BB $29.29  982213SN $30.50  482213 $9.14
-12 1/2  982214 $24.39  982214BB $29.29  982214SN $30.50  482214 $9.14
-12 3/4  982212 $24.39  982212BB $29.29  982212SN $30.50  482212 $8.58
-12 1  982215 $39.29  982215BB $47.15  982215SN $49.10  482215 $19.25
-16 3/4  982217 $38.42  982217BB $46.11  982217SN $48.03  482217 $17.27
-16 1  982216 $38.42  982216BB $46.11  982216SN $48.03  482216 $15.74
-20 1  982221 $71.94  982221BB $86.35  982221SN $89.94
-20 1 1/4  982220 $71.92  982220BB $86.30  982220SN $89.89
XRP?s Black Anodized Aluminum Adapters, the Latest in High Performance Fluid
Delivery. Xtra Large Internal Radius and Contoured Entrances for Improved
Laminar Flow

Flare Unions - Male - Aluminum, Super Nickel & Steel

 Straight

Size  Aluminum - Blue  Aluminum - Black  Super Nickel    Large Hex - Steel
Small Hex - Steel
Flare  P/N Price  P/N Price  P/N Price     P/N Price  P/N Price
-3  981503 $3.04  981503BB $3.65  981503SN $3.81     481503 $3.22  481573
$5.84
-4  981504 $3.04  981504BB $3.65  981504SN $3.81     481504 $2.15  481574
$2.20
-6  981506 $3.04  981506BB $3.65  981506SN $3.81     481506 $1.83
-8  981508 $5.41  981508BB $6.49  981508SN $6.76     481508 $2.87
-10  981510 $6.28  981510BB $7.53  981510SN $7.85     481510 $4.75
-12  981512 $12.20  981512BB $14.64  981512SN $15.25     481512 $7.63
-16  981516 $20.49  981516BB $24.59  981516SN $25.61     481516 $7.93
-20  981520 $27.45  981520BB $32.94        481520 $10.71


90°      Tee

Size  Aluminum  Steel  Aluminum - Blue  Aluminum - Black  Super Nickel
Steel
Flare  P/N Price  P/N Price  P/N Price  P/N Price  P/N Price  P/N Price
-3  982103 $8.48  482103 $10.10  982403 $9.22  982403BB $11.06  982403SN
$11.52  482403 $17.42
-4  982104 $7.51  482104 $8.06  982404 $9.22  982404BB $11.06  982404SN
$11.52  482404 $8.04
-6  982106 $8.48     982406 $9.22  982406BB $11.06  982406SN $11.52
-8  982108 $11.28     982408 $15.54  982408BB $18.65  982408SN $19.43
-10  982110 $16.94     982410 $20.04  982410BB $24.04  982410SN $25.04
-12  982112 $24.52     982412 $30.06  982412BB $36.06  982412SN $37.57
-16  982116 $37.57     982416 $47.13  982416BB $56.56  982416SN $58.92
-20  982120      982420 $51.63  982420BB $61.96  982420SN $64.55

MALE FLARE TO NPT PIPE ADAPTERS

  Tee, NPT on Branch  Tee, NPT on Run

Size  Aluminum  Steel  Aluminum  Steel
AN NPT  P/N Price  P/N Price  P/N Price  P/N Price
-3 1/8  982503 $10.25  482503 $21.26  982603 $12.16  482603 $21.87
-4 1/8  982504 $9.29  482504 $6.35  982604 $9.22  482604 $6.97
-6 1/4  982506 $11.28     982606 $11.21
-8 3/8  982508 $16.94  482508 $15.34  982608 $16.94
-8 1/2  982588 $65.37  482588 $17.84     482688 $17.54
-10 1/2  982510 $18.79  482510 $12.93  982610 $18.79
-12 3/4  982512 $32.78     982612 $32.78
-16 1  982516 $53.97     982616 $53.97
-20 1 1/4  982520      982620


TEE MALE FLARE TO FEMALE SWIVEL - Aluminum, Super Nickel Plated & Steel

 Female Swivel on Side     Female Swivel on Run

Size  Aluminum  Super Nickel  Steel  Aluminum  Steel
AN  P/N Price  P/N Price  P/N Price  P/N Price  P/N Price
-3  900203 $32.67     900233 $37.04  900303 $32.67  900333 $37.04
-4  900204 $15.35  900204SN $20.72  900244 $17.80  900304 $15.35  900344
$33.08
-6  900206 $19.00     900266 $11.35  900306 $19.00
-8  900208 $27.78  900208SN $37.49     900308 $27.78
-10  900210 $33.63  900210SN $45.38     900310 $33.63
-12  900212 $35.09        900312 $35.09
-16  900216 $98.42        900316 $98.42


ALUMINUM STEPPED MALE TEES

 P/N Price     P/N Price     P/N Price     P/N Price
-3 -3 -4 824334 $59.35
-4 -4 -6 824446 $19.21  -4 -6 -6 824466 $19.21        -4 -6 -4 824464 $19.21
-6 -6 -8 824668 $21.53  -6 -8 -8 824688 $21.53  -6 -6 -4 824664
$19.21  -6 -8 -6 824686 $21.53
          -8 -8 -6 824886 $21.53


SWIVEL PIPE ADAPTERS FLARE TO PIPE - Aluminum & Steel

  45° MALE     90° MALE

Size  Aluminum  Steel  Aluminum  Steel
AN NPT  P/N Price  P/N Price  P/N Price  P/N Price
-3 1/8  910803   910831   900803 $15.37  900831 $26.68
-4 1/8  910804 $23.24  910841   900804 $15.37  900841 $17.18
-4 1/4  910844      900844 $19.22
-6 1/8  910862 $23.01     900862 $19.22
-6 1/4  910806      900806 $21.70
-6 3/8  910866      900866 $23.97
-8 1/4  910867      900867 $23.97
-8 3/8  910808      900808 $23.97
-8 1/2  910888      900888 $28.79
-10 3/8  910811      900811 $30.70
-10 1/2  910810 $35.09     900810 $30.70
-12 1/2  910814      900814 $38.38
-12 3/4  910812      900812 $38.38

SWIVEL PIPE ADAPTERS FLARE TO PIPE - Aluminum & Steel

  STRAIGHT FEMALE  45° FEMALE  90° FEMALE

Size  Aluminum  Steel  Aluminum  Steel  Aluminum  Steel
AN NPT  P/N Price  P/N Price  P/N Price  P/N Price  P/N Price  P/N Price
-3 1/8  900603 $10.89  900631 $15.27  910703   910731   900703 $32.67
900731 $37.04
-4 1/8  900604 $8.76  900641 $10.74  910704   910741   900704 $23.97  900741
$19.22
-4 1/4  900644 $8.76     910744      900744 $19.74
-6 1/8  900662 $10.61     910762      900762 $23.97
-6 1/4  900606 $10.97     910706      900706 $23.97
-6 3/8  900666 $11.47     910766      900766 $28.79
-8 1/4  900667 $11.47     910767      900767 $28.79
-8 3/8  900608 $11.70     910708      900708 $28.79
-8 1/2  900688 $14.11     910788      900788 $27.45
-10 3/8  900611 $14.03     910711      900711 $34.57
-10 1/2  900610 $14.03     910710      900710 $34.57
-12 1/2  900614 $21.93     910714      900714 $48.01
-12 3/4  900612 $21.93     910712      900712 $48.01

FEMALE TO FEMALE FLARE SWIVEL COUPLINGS - Aluminum, Super Nickel & Steel
 Straight

Size  Aluminum  Super Nickel  Steel
Flare  P/N Price  P/N Price  P/N Price
-3        900133 $34.63
-4  900104 $7.44     900144 $21.53
-6  900106 $7.44  900106SN $10.04
8 to 4  900184 $20.58
8 to 6  900186 $20.58
-8  900108 $9.15
-10  900110 $11.10
-12  900112 $15.56
-16  900116 $22.57  900116SN $30.46
-20  900120 $75.78

45° Tube  90° Tube

Bill Schertz
KIS Cruiser #4045
N343BS
Phase one testing Completed


That is a real good start. Thanks Bill

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.