Anyone know what those sealing washers are called? They look like a
 regular washer but with a sort of o-ring built into the inside of
 the hole.

 Paul, you should have the spinner tomorrow.

 Brian Trubee


 Here they are at McMaster Carr
 http://www.mcmaster.com/#sealing-washers/=ckzp3b

 Thanks Brian

 Paul Lamar


 Brian,
 They used to be called flex-o-seal and stat-o-seal washers. I believe
 they went generic when the patent lapsed.
 Bill Jepson
 --
 Brian, the carbon fiber 16 inch spinner came it. Looks fantastic.
 Weighs nothing. Thanks.

 Paul Lamar


 Glad you can use it. Can't wait to see it in action. It was made by a
 guy named Brian Alley.


 Brian Trubee

they are called dowty washers, here's a link for earls, they are normally
available at your local hydraulic hose shop

http://www.earls.com.au/files/49ff99ea5ade7-PCLAMPSALUMDOWTYSTATOSEALWASHERS.pdf

sorry you'll have to copy & paste the link, apple wants to convert the
email.

Easty

A word of caution on the sealing washers.

The tension bolt holes have a countersink recess where the sealing washer
goes. This requires a fairly close fit of the washer holding the little
o-ring in place for doing its job. I can not see how the washers available
at McM can do that.
I am using those washers on the single rotor, but I do not have that recess
as MAZDA has it.

Richard Sohn
N2071U